Firmware Upgrade

Welcomme to the Firmware upgrade page.

Warning: Installing firmware on the wrong controller model will damage your controller and void your warranty. Firmware versions are not interchangeable.

SplitFish products are not affected by the PS3 3.50 update, and will not be affected by any future update(s).
______________________________________________________________________________

 FragFX SHARK PS3/PC/MAC        No Firmware Needed

 FragFX SHARK360/PC/MAC          No Firmware Needed

______________________________________________________________________________

FragFX PIRANHA

 
 (Firmware and Tweak Utility)
FragFX PIRANHA                               
Playstation 3 - 32bit                                
FragFX PIRANHA
Playstation 3 - 64bit
FragFX_PIRANHA_64bit.zip        
 
______________________________________________________________________________

FragFX BARRACUDA

 
 (Firmware and Tweak Utility)
FragFX BARRACUDA
Playstation 3 / PC - 32bit
BARRACUDA_32bit.zip         
FragFX BARRACUDA
Playstation 3 / PC - 64bit

______________________________________________________________________________

Dual SFX Frag Pro    

 
 (Firmware and Tweak Utility)
Dual SFX Frag Pro
Playstation 3 / PC - 32 bit 
 
Dual SFX Frag Pro
Playstation 3 / PC - 64 bit
 
Dual SFX Frag Pro Firmware/Tweak Utility release notes: 
Versions 3.4 / 4.0 / 4.1 are the same gamplay.
Dual SFX Frag Pro owners with firmware version 3.4 do not need to upgrade.
Version 4.0 had introduced tweaking for the DUAL SFX Evolution and caused connectivity
issues on some units.
Version 4.1. corrects connectivity issues and allows tweaking the DUAL SFX Evolution.
______________________________________________________________________________

FragFX V2 / SE

 
 (Firmware and Tweak Utility)
FragFX V2 / SE
Playstation 3 - 32bit
FragFX V2 / SE
Playstation 3 - 64bit
______________________________________________________________________________

SplitFish FragFX V1
To continue using your FragFX V1 we suggest you do not update your Playstation to 3.50.

Sonys firmware update 3.50 terminates the FragFX V1. SplitFish will not be releasing an update to correct this issue as the V1 has been discontinued and not been produced by SplitFish in over 2 years.
There are some counterfeit (illegal) controllers deceptively labelled as V2 that will cease to operate too. SplitFish does not support these.

Within our customer loyalty program we will offer our Frag FX V2 at a significantly reduced price for those who wish to update to Sonys Firmware 3.50 and will therefore be affected.
In order to benefit from this offer please fill out a support ticket at http://support.splitfish.com.

______________________________________________________________________________